Western Telematic AFS-16-1 Switch User Manual


 
5-42
Basic Configuration
5.9.11. Email Messaging Parameters
The Email Messaging menu is used to define parameters for email messages that the
AFS-16 can send to notify you when an alarm is triggered. To define email message
parameters, you must access the AFS-16 Command Mode using a password that
permits access to Administrator Level commands.
The Email Configuration menu offers the following options:
• Enable: Enables/Disables the Email Messaging feature. When disabled, the
AFS-16 will not be able to send email messages when an alarm is generated.
(Default = On.)
• SMTPServer: This prompt is used to define the address of your SMTP Email
server. (Default = 192.168.100.43.)
• PortNumber: Selects the TCP/IP port number that will be used for email
connections. (Default = 25.)
• Domain: The domain name for your email server. (Default = undefined.)
Note:Inordertousedomainnames,youmustfirstdefineDomainName
ServerparametersasdescribedinSection5.9.5.
• UserName: The User Name that will be entered when logging into your email
server. (Default = undefined.)
• Password: The password that will be used when logging into your email server.
(Default = undefined.)
• AuthType: The Authentication type; the AFS-16 allows you to select None, Plain,
Login, or CRAM-MD5 Authentication. (Default = Plain.)
• FromName: The name that will appear in the "From" field in email sent by the AFS-
16. (Default = undefined.)
• FromAddress: The email address that will appear in the "From" field in email sent
by the AFS-16. (Default = undefined.)
• ToAddress: The address(es) that will receive email messages generated by the
AFS-16. Note that up to three "To" addresses may be defined, and that when Alarm
Configuration parameters are selected as described in Section 7, you may then
designate one, two or all three of these addresses as recipients for email messages
that are generated by the alarms. (Default = undefined.)
• SendTestEmail: Sends a test email, using the parameters that are currently
defined for the Email configuration menu.
Note:The"SendTestEmail"functionisonlyavailableviatheTextInterface.