Filter
Top Products
17-9
Command Reference Guide
/G Circuit Group Parameters
Displays a menu that is used to View, Add, Modify or Delete Circuit Groups. For more
information on Circuit Groups, please refer to Section 5.7.
Availability: Administrator
Format: /G [Enter]
/N Network Port Parameters
Displays a menu which is used to select parameters for the Network Port. Also allows
access to the IP Security function, which can restrict network access by unauthorized
IP addresses and domain names. All of the functions provided by the /N command
are also available via the Web Browser Interface. For more information, please refer to
Section 5.9.
Availability: Administrator
Format: /N [Enter]
/PNA Configure Ping-No-Answer Function
Displays a menu that is used to configure the Ping-No-Answer function. The Ping-No-
Answer function allows the AFS-16 to automatically perform A/B switching when a target
device fails to respond to a ping command. For more information on the Ping-No-
Answer function, please refer to Section 6.
Note:Ifdesired,thePing-No-Answerfunctioncanalsobeconfiguredtosend
emailnotificationwheneveratargetdevicefailstorespondtoapingcommand.
Formoreinformation,pleaserefertoSection7.2.
Availability: Administrator
Format: /PNA [Enter]
/AC Alarm Configuration Parameters
Displays a menu that is used to configure and enable the Over Temperature Alarms,
Lost Communication Alarm, Ping-No-Answer Alarm, Invalid Access Lockout Alarm,
Power Cycle Alarm and Monitor/Alarm Input function. For more information on Alarm
Configuration, please refer to Section 7.
Availability: Administrator
Format: /AC [Enter]