5-22
Basic Configuration
5.7.2. Adding Circuit Groups
The "Add Circuit Group to Directory" option allows you to create new Circuit Groups and
assign circuit access rights to each group. Note that the Add Circuit Group function is
only available when you have accessed command mode using a password that permits
Administrator Level commands.
The Add Circuit Group Menu can be used to define the following parameters for each
new account:
• CircuitGroupName: Assigns a name to the Circuit Group. (Default = undefined.)
• CircuitAccess: Determines which Circuit Modules this Circuit Group will be
allowed to control. (Default = undefined.)
Notes:
• IntheTextInterface,CircuitAccessisconfiguredbyselectingitem2and
thenselectingthedesiredcircuitsfromtheresultingsubmenu.
• IntheWebBrowserInterface,CircuitAccessisconfiguredbyselectingthe
desiredcircuitsfromalistofallcircuitsintheAddCircuitGroupmenu.
• AfteryouhavefinisheddefiningoreditingCircuitGroupparameters,make
certaintosavethechangesbeforeproceeding.IntheWebBrowser
Interface,clickonthe"AddCircuitGroup"buttontosaveparameters;inthe
TextInterface,pressthe[Esc]keyseveraltimesuntiltheAFS-16displays
the"SavingConfiguration"messageandthecursorreturnstothecommand
prompt.
5.7.3. Modifying Circuit Groups
The "Modify Circuit Group" function allows you to edit existing Circuit Groups in order
to change circuit access rights. Note that this function is only available when you
have accessed command mode using a password that permits Administrator Level
commands.
Once you have accessed the Modify Circuit Group menu, use the menu options to
redefine parameters in the same manner that is used for the Add Circuit Group menu, as
discussed in Section 5.7.2.
Note:Afteryouhavefinishedchangingoreditingparameters,makecertain
tosavethechangesbeforeproceeding.IntheWebBrowserInterface,click
onthe"ModifyCircuitGroups"buttontosaveparameters;intheTextInterface,
pressthe[Esc]keyseveraltimesuntiltheAFS-16displaysthe"Saving
Configuration"messageandthecursorreturnstothecommandprompt.
5.7.4. Deleting Circuit Groups
This function is used to delete individual Circuit Groups. Note that this function is only
available when you have accessed command mode using a password that permits
Administrator Level commands.
Note:DeletedCircuitGroupscannotbeautomaticallyrestored.