Western Telematic AFS-16-1 Switch User Manual


 
5-34
Basic Configuration
• AuthenticationProtocol: Determines which authentication protocol will be used.
The AFS-16 supports both MD5 and SHA1 authentication. (Default = MD5.)
Notes:
• TheAuthenticationProtocolthatisselectedfortheAFS-16mustmatchthe
protocolthatyourSNMPclientwillusewhenqueryingtheAFS-16unit.
• TheAuthenticationProtocoloptionisnotavailablewhentheVersion
parameterissettoV1/V2
• SNMPContact: (Default = undefined.)
• SNMPLocation: (Default = undefined.)
• ReadOnlyCommunity: Note that this parameter is not available when the SNMP
Version is set to V3. (Default = Public.)
• Read/WriteCommunity: Note that this parameter is not available when the SNMP
Version is set to V3. (Default = Public.)
Note:IfidenticalnamesaredefinedfortheReadOnlyCommunityand
Read/WriteCommunity,thentheunitwillgiveprioritytotheRead/Write
Communityoption.
5.9.7. SNMP Trap Parameters
These menus are used to select parameters that will be used when SNMP traps are
sent. For more information on SNMP Traps, please refer to Section 12. Text Interface
and Web Browser Interface allow the following parameters to be defined:
• SNMPManager1: The IP Address for the first SNMP Manager. For more
information, please refer to Section 12. (Default = Undefined.)
Note:InordertoenabletheSNMPTrapfeature,youmustdefineatleastone
SNMPManager.
• SNMPManager2: (Default = Undefined.)
• TrapCommunity: (Default = Public.)