Filter
Top Products
145
Specifications
Printing Specifications
6/30/06 105SL User Guide 11342L-001 Rev. A
Printing Specifications
Ribbon Specifications
Printing Specifications
Resolution 203 dots/inch (8 dots/mm) or
300 dots/inch (12 dots/mm)
Dot size (width × length) 203 dpi 0.0049 in. × 0.0049 in. (0.125 mm × 0.125 mm)
300 dpi 0.0033 in. × 0.0039 in. (0.084 mm × 0.10 mm)
First dot location measured from inside media edge 0.10 in. ± 0.035 in. (2.5 mm ± 0.89 mm)
Maximum print width for roll media 4.49 in. (114 mm)
Maximum print width for fanfold media 4.1 in. (104 mm)
Print Length
(maximum)
Continuous printing 203 dpi 90 in. (2286 mm)
300 dpi 41 in. (1041 mm)
Media registration toleration*
(non-continuous media)
Vertical ±0.050 in. (1.3 mm)
Horizontal ±0.050 in. (1.3 mm)
Programmable print speeds 203 dpi 2.4 in. (61 mm) through 8.0 in. (203 mm)
per second in 1 in. (25.4 mm) increments
300 dpi 2.4 in. (61 mm) through 8.0 in. (203 mm)
per second in 1 in. (25.4 mm) increments
Bar code
modulus (“X”)
dimension
Ladder (rotated)
orientation
203 dpi 4.9 mil to 49 mil
300 dpi 3.9 mil to 39 mil
Picket fence
(nonrotated)
orientation
203 dpi 4.9 mil to 49 mil
300 dpi 3.3 mil to 33 mil
Thin film printhead with Element Energy Equalizer (E
3
)
®
Yes
* Media registration and minimum label length are affected by media type and width, ribbon type, and print
speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any
application with thorough testing.
Ribbon Specifications
Ribbon must be wound with the coated side out.
Ribbon width Minimum 0.79 in. (20 mm)
Maximum 4.49 in. (114 mm)
Standard lengths 2:1 media to ribbon roll ratio 984 ft. (300 m)
3:1 media to ribbon roll ratio 1476 ft. (450 m)
Ribbon core inside diameter 1.0 in. (25.4 mm)
Maximum ribbon roll outside diameter 3.2 in. (81.3 mm)