Zebra Technologies 1050020011570 Printer User Manual


 
137
Troubleshooting
Printer Diagnostics
6/30/06 105SL User Guide 11342L-001 Rev. A
5. Note the relative darkness value printed on the best test label.
6. Add or subtract the relative darkness value from the darkness value specified on the
configuration label. The resulting numeric value (0 to 30) is the best darkness value for
that specific label/ribbon combination and print speed.
7. If necessary, change the darkness value to the darkness value on the best test label. See
Adjust Print Darkness on page 79.
“In-spec” The “in-spec” bar code can only be confirmed by a verifier,
but it should exhibit some visible characteristics.
The normal bar code will have complete, even bars and
clear, distinct spaces.
The rotated bar code will have complete, even bars and
clear, distinct spaces. Although it may not look as good as a
slightly dark bar code, the bar code will be “in-spec.”
In both normal and rotated styles, small alphanumeric
characters look complete.
Slightly light Slightly light labels are, in some cases, preferred to slightly
dark ones for “in-spec” bar codes.
Both normal and rotated bar codes will be in spec, but
small alphanumeric characters may not be complete.
Too light Labels that are too light are obvious.
Both normal and rotated bar codes have incomplete bars
and spaces.
Small alphanumeric characters are unreadable.
Table 18 • Judging Bar Code Quality (Continued)
Print Quality Description