Zebra Technologies 1050020011570 Printer User Manual


 
57
Operations
Load Media in Cutter Mode
6/30/06 105SL User Guide 11342L-001 Rev. A
Load Media in Cutter Mode
Refer to Figure 20. The following instructions pertain to printers with the cutter option only.
Figure 20 • Cutter Mode
To load media in Cutter mode, complete these steps:
1. Set the printer to Cutter mode. See Select Print Mode on page 80 for instructions.
2. Insert media into the printer. See Insert Media into the Printer on page 31 for instructions.
3. Open the printhead assembly by rotating the printhead-open lever counterclockwise.
1
Printed label
2
Printhead-open lever
3
Outer media guide
4
Media supply hanger
5
Media supply guide
6
Cutter
1 2 3 4 5
6