Filter
Top Products
85
Configuration
Control Panel Parameters
6/30/06 105SL User Guide 11342L-001 Rev. A
List All
This option prints labels that list the available fonts, bar codes, images,
formats, and the current printer and network configurations.
To print labels for all settings:
1. Press PLUS (+) to select PRINT.
Format Memory Card
This option erases all previously stored information from the optional
PCMCIA card or Compact Flash card.
Caution • This option completely erases the selected card.
To format a memory card:
1. Press MINUS (-) to select A: or PLUS (+) to select B:.
If your printer is set to require a password, you are prompted to enter
the password.
2. Enter the password. For instructions, see Change Password-Protected
Parameters on page 76.
3. Press the appropriate button again to select the desired card.
The display shows ARE YOU SURE?.
4. Do you wish to continue?
• Press
MINUS (-) to select NO to cancel the request and return to
FORMAT CARD prompt.
• Press
PLUS (+) to select YES and begin initialization.
When initialization is complete, the printer automatically exits Setup
mode, and the control panel displays
PRINTER READY. If you exit
Setup mode while initialization is still in process, the control panel
display flashes between the phrases
CHECKING B: MEMORY and
PRINTER IDLE.
Note • Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Table 9 • Printer Parameters (Page 7 of 19)
Parameter
Action/Explanation
LIST ALL
PRINT
FORMAT CARD:
A: B: