Filter
Top Products
Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
148
Figure 79 DECT Base Station Button - Top of the ZyXEL Device
2 Put your DECT phone in registration mode. Refer to your DECT phone documentation.
When the ZyXEL Device is in registration mode, it scans its surrounding area for DECT
phones in registration mode.
Figure 80 DECT Base Station - Phone Registration
" Make sure your DECT phone is within range of the ZyXEL Device during the
registration process. See Appendix A on page 287 for the range of your ZyXEL
Device.
3 Enter the Personal Identification Number (PIN) in the DECT phone.
When a ZyXEL Device discovers a DECT phone in registration mode, it sends a request
for a PIN. Your DECT phone receives the request and prompts you to enter the PIN. Use
your DECT phone’s keypad to enter the PIN (you configured on the ZyXEL Device).
" The default PIN of the ZyXEL Device is 1234.
4 Repeat steps 1 - 3 to register additional phones. See Appendix A on page 287 for the
number of DECT phones your ZyXEL Device supports.