Filter
Top Products
Chapter 2 Introducing the Web Configurator
P-2302HWUDL-P1 Series User’s Guide
42
1 Make sure the POWER LED is on and not blinking.
2
Press and hold the RESET button for ten seconds. Release the RESET button when the
POWER LED begins to blink. The default settings have been restored.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The password is “1234”. You have finished.
If the ZyXEL Device does not restart automatically,
disconnect and reconnect the ZyXEL
Device’s power. Then, follow the directions above again.
2.3.1 Reset Button and WLAN
You can also use the RESET button to turn on/off your wireless network. Press the RESET
button for 1 second to turn on/off the WLAN.
2.4 Web Configurator Main Screen
Figure 10 Main Screen
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar
A
B
C
D