ZyXEL Communications P-2302 Network Card User Manual


 
Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
151
Figure 82 VoIP > Phone > DECT Phone
Each field is described in the following table.
Table 65 VoIP > Phone > DECT Phone
LABEL DESCRIPTION
Outgoing Call Use If you select both SIP accounts, the ZyXEL Device tries to use the most recently
registered SIP account first.
SIP1 Select this if you want to use the SIP1 account when making outgoing calls with
your DECT phones.
SIP2 Select this if you want to use the SIP2 account when making calls with your DECT
phones.
Incoming Call
apply to
If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
SIP1 Select this if you want to receive phone calls for the SIP1 account on your DECT
phones.
SIP2 Select this if you want to receive phone calls for the SIP2 account on your DECT
phones.
PSTN Line Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on your DECT phones. (P-2302HWUDL-P1 model only)
Base Station
Update
Register PIN
Code
Select this to update the PIN code of the DECT phone. The default PIN code is
1234. If you are changing the PIN code for the first time, enter 1234 in the Old PIN
Code field.
Note: When the PIN code changes, phones already registered
with the ZyXEL Device will have to re-register when they
are turned off and turned on again.
Old PIN Code Enter the existing PIN code. The PIN code can be from 1 to 4 digits long and is
limited to numbers 0 to 9.
New PIN
Code
Enter the new PIN code. The PIN code is 1 to 4 digits long and is limited to
numbers 0 to 9.