Filter
Top Products
Chapter 6 - Utilities
6-13
Step 5: Save and Exit
Figure 6-6 shows the Save and Exit screen. Press Enter to save your configuration
and exit the ECU program. You can also exit without saving in this step.
In order to complete the configuration process, you must
save your configuration. In this step, you must select
whether to save your configuration or to discard your
changes before exiting this program.
If you choose to save, this program will save the new
configuration in your computer’s nonvolatile memory and
in a SYSTEM.CHL and SYSTEM.SCI files in your current
directory, and then your computer will be restarted for
you. (The files will not be created if you are running
on a CD.) If you choose to discard the configuration,
any changes you have made will be lost.
>Select=ENTER< <Cancel=ESC>
Save the configuration and restart the computer
Discard the configuration and return to the main menu
Step 5: Save and Exit
Figure 6-6 Save and Exit