Filter
Top Products
Chapter 6 - Utilities
6-17
6.3.4 Adding or Removing Boards
Each time you add or remove a board, you must reconfigure the computer using
the EISA Configuration Utility program.
Adding Boards
Follow these steps when adding a board:
1. Select Step 2: Add or remove boards from the ECU main menu. Press Enter
to display the following screen:
Figure 6-9 Add or Remove Boards
The screen contains the configuration data that the ECU read from your CFG
file. It includes the number of EISA slots and device controllers detected.
Listed are the board and options detected in your computer.
Press INSERT to add the boards or options which could not be detected
or which you plan to install.
Press DEL to remove the highlighted board from your configuration.
Press F7 to move the highlighted board to another slot.
Press F10 when you have completed this step.
>
Add=INSERT
<
<Remove=DEL> <Move=F7> <Done=F10>
>
AcerAltos Server
Slot 1 (Empty)
Slot 2 (Empty)
Slot 3 (Empty)
Embedded PCI SCSI Controller