Filter
Top Products
Chapter 7 - SCSISelect Configuration Utility
7-3
7.1.2 When to Use the SCSISelect Utility
Use the SCSISelect utility if you need to
• Change any of the default values listed in Table 7-1
• Check and/or change SCSI device settings that may conflict with those of
other devices (e.g, SCSI ID)
• Perform low-level formatting on new SCSI disk devices
7.1.3 Running the SCSISelect Utility
To start SCSISelect, press Ctrl+A when the following is displayed during power-
up or reset:
Press <Ctrl> <A> for SCSI
Select
Utility!
This message appears after BIOS and POST information displays, and after the
banner listing the Adaptec AIC-7880 version number.