Chapter 5 - BIOS Utility
5-23
5.5 PCI System Configuration
The PCI System Configuration allows you to specify the settings for your PCI
devices.
PCI System Configuration Page 1/1
PCI IRQ Setting ...........[ Auto ]
INTA INTB INTC INTD
*PCI Slot 1 ........... [--] [--] [--] [--]
*PCI Slot 2 ........... [--] [--] [--] [--]
*PCI Slot 3 ........... [--] [--] [--] [--]
*PCI Slot 4 ........... [--] [--] [--] [--]
*PCI Slot 5 ........... [--] [--] [--] [--]
*PCI Slot 6 ........... [--] [--] [--] [--]
VGA Palette Snoop .........[Disabled]
Onboard SCSI ..............[Enabled]
Boot Device ...........[Enabled]
↑↓ = Move Highlight Bar, → ← = Change Setting
PgDn/PgUp = Move Screen, Esc = Exit
5.5.1 PCI IRQ Setting
This parameter allows for Auto or Manual configuration of PCI devices. If you
use plug-and-play (PnP) devices, you can keep the default setting Auto. The
system then automatically configures the PnP devices. If your PCI device is not a
PnP, you can manually assign the interrupt for each device. Refer to your manual
for technical information about the PCI card.