Filter
Top Products
Chapter 4 - System Board 4-17
4.2.7 Reconfiguring the System
Each time you change your system’s memory configuration, you must run Setup
and the EISA Configuration Utility (ECU) to reconfigure the system.
Follow these steps to reconfigure the system:
1. Turn the system on. A memory error message appears, indicating that the
total memory does not match the value stored in CMOS.
2. Press
+ + to enter Setup. A warning message appears
indicating an incorrect memory configuration.
3. Press
twice to exit and reboot the system.
The system boots with the new memory configuration.
4. Run the EISA Configuration Utility (ECU).