Filter
Top Products
AcerAltos 19000 User’s Guide
7-2
Table 7-1 Default Settings for SCSI Controller and All Devices
Global Settings for SCSI Controller and All Devices Default Value
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Low OFF/High ON
Boot Device Option 0 (zero)
Host Adapter BIOS
1
Enabled
Support Removable Disks Under BIOS as Fixed Disks Boot only
Extended BIOS Translation for DOS Drives > 1 Gbyte Disabled
Display <Ctrl-A> Message During BIOS Initialization Enabled
Multiple Lun Support Disabled
BIOS Support for More Than 2 Drives
1
Enabled
BIOS Support for Bootable CD-ROM Enabled
BIOS Support for Int13 Extensions Enabled
Support for Ultra SCSI Speed Disabled
Individual Settings for Each SCSI Device Default Value
Initiate Sync Negotiation Yes
Maximum Sync Transfer Rate 20 MBytes/sec.
Enable Disconnection Yes
Send Start Unit SCSI Command
1
No
Initiate Wide Negotiation Yes
1
Settings are valid only if host adapter BIOS is enabled.