Filter
Top Products
AcerAltos 19000 User’s GuideC-12
C.5 Installing a Charger Board and a Battery
Box
Turn off the system and disconnect the AC power cord before
opening the system housing.
Follow these steps to install a charger board and battery box:
1. Remove the right panel door (see Figure 3-4).
2. Remove the two screws that secure the metal bar over the power supply
enclosure (see Figure C-1).
3. Pull out the metal bar from the lower end and unhook the upper end from the
housing roof (see Figure C-2).
4. Unpack a charger board.