Filter
Top Products
AcerAltos 19000 User’s Guide
7-8
The SCSI controller always checks parity when reading from the SCSI bus to
verify the correct transmission of data from your SCSI devices. You should
disable SCSI Parity Checking if any attached SCSI devices do not support SCSI
parity. (Most currently available SCSI devices do support SCSI parity.)
Use the cursor (
↑ ↓) and Enter keys to make selections. Press Esc at any time to
return to the previous menu.
Host Adapter SCSI Termination
This option allows you to configure host controller SCSI termination. Figure 7-5
shows the choices available if you have an AIC-7880. The default setting is Low
OFF/High ON.