Filter
Top Products
AcerAltos 19000 User’s Guide
7-16
Advanced Configuration Options
When you select Advanced Configuration Options, a screen similar to Figure 7-8
appears. Do not change these options unless absolutely necessary.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( =default)
Adaptec AIC7880 Ultra/Ultra W SCSISelect (TM) Utility v1.2
AIC-7880 Ultra/Ultra W at Bus:Device 00:10h
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID...................................7
SCSI Parity Checking....................................Enabled
Host Adapter SCSI Termination....................Low ON/High ON
Additional Options
Boot Device Options......................................Press <Enter>
SCSI Device Configuration............................Press <Enter>
Advanced Configuration Options...................Press <Enter>
<F6> - Reset to Host Adapter Defaults
*
Advanced Configuration Options
--------------Options Listed Below Have NO EFFECT if the BIOS is Disabled--------------
Host Adapter BIOS (Configuration Utility Reserves BIOS Space).......................Enabled
Support Removable Disks Under BIOS as Fixed Disks ......................................Boot Only
Extended BIOS Translation for DOS Drives > 1Gbyte ........................................Disabled
Display <Ctrl-A> Message During BIOS Initialization..........................................Enabled
Multiple Lun Support............................................................................................Disabled
BIOS Support for More Than 2 Drives (MS-DOS® 5.0 and above).....................Enabled
BIOS Support for Bootable CD-ROM..................................................................Enabled
BIOS Support for Int13 Extensions......................................................................Enabled
Support for Ultra SCSI Speed .............................................................................Disabled
Figure 7-8 Advanced Configuration Options Screen
Use the cursor keys (↑ ↓) to move between options. Press Enter to display a pop-
up menu with a selection of options. Use the cursor keys (
↑ ↓) to select an option,
and press Enter to make your selection.
Host Adapter BIOS
This option enables or disables the SCSI controller BIOS. The default setting is
Enabled.