Filter
Top Products
All NAS configuration is done through the ASC Console and can be found
under the
NAS Resources
and
NAS Clients
objects in the tree.
Note: If you do not see the NAS objects, the NAS option is not loaded on your
ASC Server. To enable it, you will need to start the Console, connect to this
server, right-click on the server and select
Options --> Enable NAS
.
When you highlight the
NAS Resources
object, a list of current NAS Resources is
displayed in the right pane. Under each NAS Resource, you will see a list of
folders and shares. If the folder has a hand holding it, it has been assigned as a
share.
There are two types of NAS clients you will see:
• Windows clients - These clients use the Common Internet File
System (CIFS) protocol to work together and share documents.
Because many operating systems support CIFS, it is possible to have
clients using other operating systems listed as Windows clients.
• NFS clients - These clients are usually Unix clients using the
Network File System (NFS) protocol.
To update the list of users/groups, right-click on the
Windows Clients
object
and select
Refresh Windows Clients
.
Acer Altos® NAS 700 Solution Guide
119