Filter
Top Products
10. The GRUB password is not mandatory. Leave the field blank if you don’t
want to protect the access to your boot loader. Click NEXT to continue
the installation.
11. On this page you can configure the TCPIP parameters for your 2 built-in
network cards.
ACER recommends to configure and activate on boot only the first
network card called eth0.
You can select to manually enter a static IP address or you can choose to
use a dynamic IP addressing scheme if you already have a DHCP server
installed and running on your network.
12. Firewall Configuration.
Acer Altos® NAS 700 Solution Guide
19