Filter
Top Products
Set Server Properties
To set properties for a specific server:
• Right-click on the server and select
Proper es
.
ti
The tabs you see will depend upon your ASC configuration.
• If you have multiple NICs (network interface cards) in your server, enter
the IP addresses using the
Server IP Add esses
tab. If the first IP address
stops responding, the ASC clients will attempt to communicate with
the server using the other IP addresses you have entered in the order
they are listed.
r
Notes:
- In order for the clients to successfully use an alternate IP address, your subnet
must be set properly so that the subnet itself can redirect traffic to the proper
alternate adapter.
You
cannot assign two or more NICs within the same subnet.
Acer Altos® NAS 700 Solution Guide
50