Filter
Top Products
Confirm that all information is correct and then click
Finish
to create the virtual
device SAN Resource.
(
Express
and
Custom
only) Indicate if you would like to assign the new SAN
Resource to a client.
If you select Yes, the Assign a SAN Resource Wizard will be launched.
Note: After you assign the SAN Resource to a client, you will need to restart the
client (for Windows clients, you can rescan devices from the SAN Client Monitor
instead). You will also need to write a signature, create a partition, and format
the drive so that the client can use it.
Create a direct device or service enabled device SAN Resources
Simply follow the instructions on the screen and the second Node should join
the Cluster without any further difficulties.
Right-click on
SAN Resources
and select
New
.
Select
Direct Device
or
Service Enabled Device
.
If you are creating a
Service Enabled Device
, determine if you want to preserve
the physical device’s inquiry string. Preserving it treats the physical device as
Acer Altos® NAS 700 Solution Guide
82