Filter
Top Products
Disassembly and Unit Replacement 4-7
4.3 Replacing the Hard Disk Drive
Follow these steps:
1. Turn the computer over to access the base.
2. Remove the two screws from the hard disk drive bay cover and remove the cover.
Figure 4-5 Removing the Hard Disk Drive Bay Cover
3. Lift up (1), then pull out the hard disk drive; then flip the hard disk drive over and unplug the
hard disk drive connector.
Figure 4-6 Removing the Hard Disk Drive
If you want to install a new hard disk drive, reverse the steps described above.