Filter
Top Products
Major Chips Description 2-49
• The Bidirectional Parallel Port:
• Enhanced Parallel Port(EPP) compatible
• Extended Capabilities Port(ECP) compatible, including level 2 support
• Bidirectional under either software or hardware control
• Compatible with ISA, and EISA, architectures
• Ability to multiplex FDC signals on parallel port pins allows use of an external Floppy Disk
Drive(FDD)
• Includes protection circuit to prevent damage to the parallel port when a connected printer
is powered up or is operated at a higher voltage
• The UARTs:
• Software compatible with the PC16550A and PC16450
• MIDI baud rate support
• Infrared support on UART2 (IrDA 1.0 SIR, IrDA 1.1 MIR and FIR, and Sharp SIR)
• The Address Decoder
• 6 bit or 10 bit decoding
• External Chip Select capability when 10 bit decoding
• Full relocation capability(No limitation)
• Enhanced Power Management
• Special configuration registers for power-down
• Enhanced programmable power-down FDC command
• Auto power-down and wake-up modes
• 2 special pins for power management
• Typical current consumption during power-down is less than 10 uA
• Reduced pin leakage current
• Voltage support
• 3.3/5V operation
• The General Purpose Pins:
• 1 pin, for 2 separate programmable chip select decoders, can be programmed for game
port control
• Plug and Play Compatible:
• 16 bit addressing(full programmable)
• 10 selectable IRQs
• 4 selectable DMA Channels
• 3 SIRQ Inputs allows external devices to mapping IRQs
• 100-Pin TQFP package - PC87338VJG