Agilent Technologies 01664-97005 Switch User Manual


 
Test the glitch capture on the connected channels
1 Set up the Format menu.
a Press the Format key.
b Select the field to the right of the pod, then select ECL in the pop-up menu. Use the
arrow keys to access pods not shown on the screen (select the Pods field and push
Select).
c Select Timing Acquisition Mode, then select Glitch Half Channel 125 MHz.
2
Turn on the channels that correspond to the channels being tested.
The channels being tested are the channels connected to the pulse generator in "Connect the
logic analyzer."
a Select the pod field, then select one of the two pods in the pop-up. Move the cursor to
the channel assignment field of the pod and press the Clear entry key until all
channels of the pod are assigned (all asterisks). Press the Done key.
b Turn on the clock/data channels that correspond to the clocks being tested. Turn off
the data channels and clock/data channels that are not being tested.
Testing Performance
To test the glitch capture
3–20