Filter
Top Products
Calibrating and Adjusting
This chapter gives you instructions for calibrating and adjusting the logic analyzer.
Adjustments to the logic analyzer include adjusting the CRT monitor assembly.
To periodically verify the performance of the analyzer, refer to "Testing Performance"
in chapter 3.
Logic analyzer calibration
The logic analyzer circuitry of the 1664A Logic Analyzer does not require an
operational accuracy calibration. To test the logic analyzer circuitry against
specifications (full calibration), refer to chapter 3, Testing Performance.
Set up the equipment
Turn on the logic analyzer. Let it warm up for 30 minutes if you have not already done so.
4–2