Filter
Top Products
Introduction
ARM DUI 0125A
© Copyright ARM Limited 1999. All rights reserved.
1-7
1.2.5 Multi-ICE connector
The Multi-ICE connector enables JTAG hardware debugging equipment, such as
Multi-ICE, to be connected to the core module. It is possible to both drive and sense the
system-reset line (nSRST), and to drive JTAG reset (nTRST) to the core from the
Multi-ICE connector. See Multi-ICE support on page 3-21.
Note
JTAG test equipment supplied by other vendors may also be used.