ARM R4F Computer Hardware User Manual


 
System Control Coprocessor
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. 4-68
ID013010 Non-Confidential, Unrestricted Access
To access the nVAL Reset Enable Clear Register, read or write CP15 with:
MRC p15, 0, <Rd>, c15, c1, 6 ; Read nVAL Reset Enable Clear Register
MCR p15, 0, <Rd>, c15, c1, 6 ; Write nVAL Reset Enable Clear Register
On reads, this register returns the current setting. On writes, overflow reset requests that are
currently enabled can be disabled.
For more information of how to enable reset requests on counter overflows, and how the
requests are signaled, see c15, nVAL Reset Enable Set Register on page 4-64.
c15, nVAL Debug Request Enable Clear Register
The nVAL Debug Request Enable Clear Register disables overflow debug requests from any of
the PMC Registers, PMC0-PMC2, and CCNT, that are enabled.
The nVAL Debug Request Enable Clear Register is:
A read/write register.
Always accessible in Privileged mode. The USEREN Register determines access, see c9,
User Enable Register on page 6-15.
Figure 4-51 shows the bit arrangement for the nVAL Debug Request Enable Clear Register.
Figure 4-51 nVAL Debug Request Enable Clear Register format
Table 4-49 shows how the bit values correspond with the nVAL Debug Request Enable Clear
Register.
[2] P2 PMC2 overflow reset request
[1] P1 PMC1 overflow reset request
[0] P0 PMC0 overflow reset request
Table 4-48 nVAL Reset Enable Clear Register bit functions (continued)
Bits Field Function
C
31 3210
Reserved
P2
P1
P0
Performance monitor counter overflow
debug request disables
Cycle count overflow
debug request disable
Table 4-49 nVAL Debug Request Enable Clear Register bit functions
Bits Field Function
[31] C CCNT overflow debug request
[30:3] Reserved UNP or SBZP
[2] P2 PMC2 overflow debug request
[1] P1 PMC1 overflow debug request
[0] P0 PMC0 overflow debug request