ARM R4F Computer Hardware User Manual


 
Debug
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. 11-42
ID013010 Non-Confidential, Unrestricted Access
Table 11-40 shows the values in the link register after exceptions.
The following sections describe:
Effect of debug exceptions on CP15 registers and WFAR
Avoiding unrecoverable states on page 11-43.
11.7.1 Effect of debug exceptions on CP15 registers and WFAR
The four CP15 registers that record abort information are:
1. Data Fault Address Register (DFAR)
2. Instruction Fault Address Register (IFAR)
3. Instruction Fault Status Register (IFSR)
4. Data Fault Status Register (DFSR).
For more information on these registers, see Chapter 4 System Control Coprocessor.
If the processor takes a debug exception because of a watchpoint debug event, the processor
performs the following actions on these registers:
it does not change the IFSR or IFAR
it updates the DFSR with the debug event encoding
it writes an Unpredictable value to the DFAR
it updates the WFAR with the address of the instruction that accessed the watchpointed
address, plus a processor state dependent offset:
+ 8 for ARM state
+ 4 for Thumb state.
If the processor takes a debug exception because of a breakpoint,
BKPT
, or vector catch debug
event, the processor performs the following actions on these registers:
it updates the IFSR with the debug event encoding
it writes an Unpredictable value to the IFAR
it does not change the DFSR, DFAR, or WFAR.
Table 11-40 Values in link register after exceptions
Cause of fault ARM Thumb
Return address (RA
a
) meaning
a. This is the address of the instruction that the processor can execute first on debug exception return. The
address of the access that hit the watchpoint is in the WFAR.
Breakpoint RA+4 RA+4 Breakpointed instruction address
Watchpoint RA+8 RA+8 Watchpointed instruction address
BKPT
instruction RA+4 RA+4
BKPT
instruction address
Vector catch RA+4 RA+4 Vector address
Prefetch Abort RA+4 RA+4 Address of the instruction where the execution can resume
Data Abort RA+8 RA+8 Address of the instruction where the execution can resume