ARM R4F Computer Hardware User Manual


 
Processor Signal Descriptions
ARM DDI 0363E Copyright © 2009 ARM Limited. All rights reserved. A-7
ID013010 Non-Confidential, Unrestricted Access
A.4 Interrupt signals, including VIC interface signals
Table A-3 shows the Interrupt signals including signals used on the VIC interface.
Table A-3 Interrupt signals
Signal Direction Clocking Description
nFIQ Input
CLKIN
a
Any
b
Fast interrupt
c
.
nIRQ Input
CLKIN
a
Any
b
Normal interrupt
c
.
INTSYNCEN Input Tie-off Tie HIGH if the interrupt inputs are asynchronous to CLKIN.
Tie LOW if the interrupt inputs are synchronous to CLKIN.
IRQADDRV Input
CLKIN
d
Any
e
Indicates IRQADDR is valid.
IRQADDRVSYNCEN Input Tie-off Tie HIGH if the IRQADDRV input from the VIC is
asynchronous to CLKIN.
Tie HIGH if the IRQADDRV input from the VIC is
synchronous to CLKIN.
IRQADDR [31:2] Input - Address of the IRQ. This signal must be stable when
IRQADDRV is asserted.
IRQACK Output CLKIN Acknowledges interrupt.
nPMUIRQ Output CLKIN Interrupt request by Performance Monitor Unit (PMU).
a. When INTSYNCEN is tied LOW
b. When INTSYNCEN is tied HIGH
c. This signal is level-sensitive and must be held LOW until a suitable interrupt response is received from the processor.
d. When IRQADDRVSYNCEN is tied LOW
e. When IRQADDRVSYCNEN is tied HIGH