Filter
Top Products
Network
4-14 Avaya Wireless AP-3 User’s Guide
You can configure and view the following parameters within the DHCP
Server Configuration screen:
Parameter Description
Enable DHCP
Server
Place a check mark in the box provided to
enable DHCP Server functionality.
NOTE:
You cannot enable the DHCP Server
functionality unless there is at least one
IP Pool Table Entry configured.
Subnet Mask This field is read-only and reports the
Access Point’s current subnet mask. DHCP
clients that receive dynamic addresses from
the AP will be assigned this same subnet
mask.
Gateway IP
Address
The AP will assign the specified address to its
DHCP clients.
Primary DNS IP
Address
The AP will assign the specified address to its
DHCP clients.
Secondary DNS IP
Address
The AP will assign the specified address to its
DHCP clients.
Number of IP Pool
Table Entries
This is a read-only field that reports the
number of IP address pools currently
configured.