Filter
Top Products
Filtering
4-66 Avaya Wireless AP-3 User’s Guide
When creating a filter, you can configure the Wired parameters only, the
Wireless parameters only, or both sets of parameters. Which parameters
to configure depends upon the traffic that you want block:
Creating an Entry
To create an entry, click Add and enter the appropriate MAC addresses
and Masks to setup a filter. The entry is enabled automatically when
saved. To edit an entry, click Edit. To disable or remove an entry, click
Edit and change the Status field from Enable to Disable or Delete.
To block all traffic ... Configure ...
from a specific wired
MAC address from
being forwarded to
the wireless network
only the Wired MAC Address and Wired
Mask (leave the Wireless MAC Address
and Wireless Mask set to all zeros).
from a specific
wireless MAC
address from being
forwarded to the
wired network
only the Wireless MAC address and
Wireless Mask (leave the Wired MAC
Address and Wired Mask set to all zeros).
between a specific
wired MAC address
and a specific
wireless MAC
address
all four parameters.