Filter
Top Products
RADIUS
Avaya Wireless AP-3 User’s Guide 4-117
The back-up servers are optional, but when configured, the AP will
communicate with the back-up server if the primary server is off-line. After
the AP has switched to the backup server, it will periodically check the
status of the primary RADIUS server every five (5) minutes. Once the
primary RADIUS server is again online, the AP automatically reverts from
the backup RADIUS server back to the primary RADIUS server. All
subsequent requests are then sent to the primary RADIUS server.
MAC Access Control Via RADIUS Authentication
If you want to control wireless access to the network and if your network
includes a RADIUS Server, you can store the list of MAC addresses on
the RADIUS server rather than configure each AP individually. From the
RADIUS Authentication tab, you can define the IP Address of the server
that contains a central list of MAC Address values that identify the
authorized stations that may access the wireless network. You must
specify information for at least the primary RADIUS server. The back-up
RADIUS server is optional.
NOTE:
Contact your RADIUS server manufacturer if you have problems
configuring the server or have problems using RADIUS
authentication.
Follow these steps to enable RADIUS MAC Access Control:
1. Within the RADIUS Access Control Configuration screen, place
a check mark in the box labeled Enable RADIUS MAC Access
Control.