Filter
Top Products
Management
Avaya Wireless AP-3 User’s Guide 4-53
IP Access Table
The Management IP Access table limits in-band management access to
the IP addresses or range of IP addresses specified in the table. This
feature applies to all management options (SNMP, HTTP, and CLI) except
for CLI management over the serial port. To configure this table, click Add
and set the following parameters:
• IP Address: Enter the IP Address for the management station.
• IP Mask: Enter a mask that will act as a filter to limit access to a
range of IP Addresses based on the IP Address you already
entered.
HTTP (Web)
Password
For the Web browser HTTP interface. Enter
a password in both the Password field and
the Confirm field. The default password is
“public”.
NOTE:
For security purposes Avaya recommends changing ALL
PASSWORDS from the default “public” immediately, to restrict
access to your network devices to authorized personnel. If you
lose or forget your password settings, you can always perform
the Reset to Factory Default Procedure.
Type Description