Filter
Top Products
6
Avaya Wireless AP-3 User’s Guide 6-1
Commands
In This Chapter
• Logging into the HTTP Interface
• Download: Download files from a TFTP server to the AP.
• Upload: Upload configuration files from the AP to a TFTP server.
• Reboot: Reboot the AP in the specified number of seconds.
• Reset: Reset all of the Access Point’s configuration settings to
factory defaults.
• Help Link: Configure the location where the AP Help files can be
found.
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may
use your web browser to issue commands.
The Command Line Interface (CLI) also provides a method for issuing
commands using Telnet or a serial connection. This section covers only
use of the HTTP Interface. For more information about issuing commands
with the CLI, refer to Command Line Interface (CLI).