Filter
Top Products
Other Network Settings
A-56 Avaya Wireless AP-3 User’s Guide
Configure Authentication Mode
Single-radio APs use index 3. Dual-radio APs use index 3 for Slot A and
index 4 for Slot B.
[Device Name]>set secconfigtbl <index> authmode <none, 802.1x,
mixed, wpa, wpa-psk>
[Device Name]>set secconfigtbl <index> enckeylen <64bits,
128bits>
[Device Name]>set secconfigtbl <index> rekeyint <60 – 65535
seconds; default is 900 sec>
[Device Name]>show secconfigtbl (to review your settings)
[Device Name]>reboot 0
NOTE:
If you set Authentication Mode to 802.1x, WPA, or Mixed, you also
need to configure the RADIUS Authentication parameters. If you set
Authentication Mode to Mixed, you also need to configure WEP
Encryption settings.
For Dual-radio APs: WPA is available for APs with an 11a Upgrade
Kit or 802.11b/g Kit. WPA is NOT available for APs with an 802.11b
PC Card or a 5 GHz Upgrade Kit.