CLI Command Types
Avaya Wireless AP-3 User’s Guide A-21
reboot
Reboots Access Point after specified number of seconds. Specify a value
of 0 (zero) for immediate reboot.
[Device Name]> reboot 0
[Device Name]>
reboot 30
search
Lists the parameters supported by the specified table. This list
corresponds to the table information displayed in the HTTP interface. In
this example, the CLI returns the list of parameters that make up an entry
in the IP Access Table.
[
Device Name]> search mgmtipaccesstbl
Figure A-9. Results of “search mgmtipaccesstbl” CLI command