Filter
Top Products
Initialization
2-22 Avaya Wireless AP-3 User’s Guide
— Result: ScanTool scans the subnet and displays all detected
Access Points. The ScanTool’s Scan List screen appears, as
shown in the following example.
NOTE:
If your computer has more than one network adapter installed, you
will be prompted to select the adapter that you want ScanTool to use
before the Scan List appears. If prompted, select an adapter and
click OK. You can change your adapter setting at any time by
clicking the Select Adapter button on the Scan List screen.
The ScanTool Network Adapter Selection screen will not appear
if your computer only has one network adapter installed.
Figure 2-13. Scan List
7. Locate the MAC address of the AP you want to initialize within the
Scan List.