Filter
Top Products
Interfaces
4-34 Avaya Wireless AP-3 User’s Guide
Load Balancing Enable this option so clients can evaluate
which Access Point to associate with, based
on current AP loads. This feature is enabled
by default; it helps distribute the wireless load
between APs. This feature is not available if
you are using an Avaya 802.11a/b Card or a
non-Avaya Wireless client with the AP.
Medium Density
Distribution
When enabled, the Access Point
automatically notifies wireless clients of its
Distance Between APs, Interference
Robustness, and RTS/CTS Medium
Reservation settings. This feature is
enabled by default and allows clients to
automatically adopt the values used by its
current Access Point (even if these values
differ from the client’s default values or from
the values supported by other
Access Points).
NOTE:
This feature is not available if you are using an
Avaya 802.11a/b Card or a non-Avaya Wireless
client with the AP. Avaya recommends that you
leave this parameter enabled, particularly if you
have Avaya Wireless clients on your wireless
network (leaving this parameter enabled should not
adversely affect the performance of any
Avaya 802.11a/b Cards or non-Avaya Wireless
cards on your network).
Parameter Description