Filter
Top Products
Chapter 6 X330WAN CLI Commands
202 Avaya X330WAN User’s Guide
show ip protocols RIP Displays RIP details.
Output Example
show ip reverse-arp
Use the show ip reverse-arp command to display the IP address of a host, based
on a known MAC address.
Syntax
show ip reverse-arp <mac addr> [<match len>]
Parameters
Example
Output Example
X330WAN-2DS1-1(super)# show ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address MAC Address I/F Type TTL
--------------- ----------------- ----------- ------- --------
149.49.70.68 00:10:a4:98:97:e0 e-70 Dynamic 14355
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushed after 300
Redistributing: rip
Default version control: rip version 1
Interface Version Key
Routing for Networks:
Routing Information Sources:
Gateway Last Update
mac addr
MAC address.
match len
The number of bytes in the address to match.
show ip reverse-arp 00:40:0d:67:53:04 List IPs that match the MAC.
show ip reverse-arp 00:40:0d:00:00:00 3 List IPs that match a vendor MAC.