Filter
Top Products
VoIP Implementation with a G700 Media Gateway and an S8300 Media Server
Avaya X330WAN User’s Guide 71
Configuration Example 2 for Site B - Two VCs Between Sites
Following is the configuration procedure for the X330WAN-2USP as shown in
Figure 4.11:
• Loopback and PMI interfaces configuration:
X330WAN-2USP-1(super)# interface Loopback 1
X330WAN-2USP-1(super-if:Loopback1)# ip address 20.20.20.20 24
The Primary management interface has changed. Please copy the running
configuration to the start-up configuration file, and reset the
device.
X330WAN-2USP-1(super-if:Loopback1)# exit
X330WAN-2USP-1(super)# copy running-config startup-config
X330WAN-2USP-1(super)# reset
• FabricFastEthernet interface configuration:
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1
X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# ip address 3.3.3.1
24
X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# exit
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1.1
X330WAN-2USP-1(super-subif:FabricFastEthernet1:1.1)# ip address
4.4.4.1 24
X330WAN-2USP-1(super-if:FabricFastEthernet1:1.1)# exit
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:2
X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# ip address
33.33.33.1 24
X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# exit
• Configuration of a Policy list with the appropriate DSCP-CoS mappings:
X330WAN-2USP-1(super)# set qos policy-source local
X330WAN-2USP-1(super)# ip access-list-name 100 voice
X330WAN-2USP-1(super)# ip access-list-dscp operation 100 34 fwd7
X330WAN-2USP-1(super)# ip access-list-dscp operation 100 46 fwd6
X330WAN-2USP-1(super)# ip access-list-dscp trust 100 trust-cos-dscp
• Activating the Policy List on the FabricFastEthernet interface:
X330WAN-2USP-1(super)# interface FabricFastEthernet 1
X330WAN-2USP-1(super-if:FabricFastEthernet1)# ip access-group 100 in
X330WAN-2USP-1(super-if:FabricFastEthernet1)# exit
• Map-class configuration:
X330WAN-2USP-1(super)# map-class frame-relay voip
X330WAN-2USP-1(super-map-class)# cir out 128000
X330WAN-2USP-1(super-map-class)# bc out 16000
X330WAN-2USP-1(super-map-class)# exit
X330WAN-2USP-1(super)# map-class frame-relay data