Filter
Top Products
11. Input Slots for ViewScape
What can be adjusted?
This window consists out of 3 parts:
• Image processing
• Frequency reclock
•RGBContrast
11.2.2 Image Processing
Refresh Rate DDC
Configure the DVI with VESA standard. There are five selectable resolution setup values that can be
recognized by the graphic card through DDC communication.
VGA 85Hz refresh rate
SVGA 60Hz refresh rate
XGA 60Hz refresh rate
SXGA 60Hz refresh rate
UXGA 60Hz refresh rate
The graphic card will boot up in the selected display mode as far as the selected display mode is within
the card’s capabilities.
Pixel Select
Single/dual pixel mode. 24bits/48bits.
Set always in "Single" for VGA, SVGA.
Set always in "Dual" for XGA, SXGA and UXGA.
11.3 Input D320 Y UV/RG(s)B
11.3.1 Settings start up
How to start up
1. Click against YUV/RG(s)B input on the Input Slots part of the menu gives the YUV/RG(s)B
parameter window. (image 11-4)
2. Click on the
to return to the general D320 window.
3. Click on
to restore the default settings.
R5976476 VIEWSCAPE TOOLSET 01/07/2004
99