Filter
Top Products
11. Input Slots for ViewScape
Saturation
Adjustable from 0 to 15 with the corresponding slider.
Saturation is the intensity of the color, 0 will be black & white.
Brightness
Adjustable from 0 to 63 with the corresponding slider.
Brightness is the intensity of the displayed signal.
Brightness will add or subtract ... to the luminance part of the signal.
Tint
If your input source is NTSC, click on NTSC. The slider will be available. If your source is Pal/Secam,
click on PAL. The slide will disappear.
Adjustable from 0 to 255 with the corresponding slider.
Only for NTSC 4.43 or NTSC 3.58
Contrast
Adjustable from 0 to 127 with the corresponding slider.
Contrast is digital signal level alignment of the input signal.
Luma Tracking
Adjustable from 0 to 15 with the corresponding slider.
Luma Tracking adjusts the level of green haze appearing in the low lights.
Clip to Subblack
Adjustable from 0 to 15 with the corresponding slider.
Clip To Subblack will filter spurious LSB’s in low lights under black-level, to prevent that spurious pixels
appear in black planes, even after Dynamic Image Stabilization.
De-interlacing Mode
Select between Median/Filmmode or Line Repetition.
The Median/Filmmode is effective when the source signal has interlaced fields between frames.
The Line Repetition is effective for a non-interlace field sources (static images
). The lines of the odd field
will be doubled to obtain a complete image.
For normal video, Median/Filmmode should be selected.
Filmmode
Toggle between ON/OFF for either switching the Filmmode on or off.
Select ON to enable 2 to 2/3 to 2 pull down processing....
Select OFF to force the processing to normal ...
When filmmode is ON, banner protections is available.
Film Detection Sensitivity
Select the level at which the filtered response for film content should be driven at. Useful for noisy video
content.
110
R5976476 VIEWSCAPE TOOLSET 01/07/2004