Filter
Top Products
3. Configuration Wizard
4. The OVERLAPPATTERN test pattern is by default selected. To select another pattern, click on the drop
down box next to Test pattern and select the desired pattern.. (image 3-37)
5. Check Active to activate pattern.
6. Adjust the overlap area using the lens shift of the projector until the outline of the pattern of one projector
matches the green line of the pattern on the second projector et vice versa. (image 3-38)
Note: Disable the projector’s test pattern.
7. Click on the < or > button for the next overlap zone and repeat step 6.
8. Adjust eventually the entered overlap value by entering a new value or by clicking on the - or + button.
9. Select the OUTLINE pattern and click Next>> to continue.
Image 3-36
Log window special overlap patterns
Image 3-37
Overlap zone adjustment
Projector 1
Projector 2
Image 3-38
Overlap area adjustment
R5976476 VIEWSCAPE TOOLSET 01/07/2004 33