Filter
Top Products
11. Input Slots for ViewScape
Clamp Duration
This sets the duration of the clamp. These both adjustments, providing considerable flexibility, to have a
good image
Range 0 - 255
11.8.3 Resolution Settings
Resolution Source
Set Resolution Source according the resolution of your source. When your graphic card has DCC com-
munication, the resolution source setting should be the same as DDC resolution.
The following settings are possible:
VGA
SVGA
XGA
SXGA 60Hz
SXGA 75Hz
SXGA 85Hz
UXGA 60Hz
VCO R ange
This setting will automatically set when the ’Resolution source’ setting is entered.
15 - 30 MHz
30 - 60 MHz
60 - 120 MHz
110 - 140 MHz
VCO Low Pass Filter
Default value will be filled in. Change this value to a higher or lower value to improve the image.
50
100
150
250
350
500
750
1500
R5976476 VIEWSCAPE TOOLSET 01/07/2004
117