Filter
Top Products
5. RS232 Set up
5. RS232 SET UP
Overview
•Startup
• Quick status change of RS232
5.1 Start up
To to start up
1. Click on RS232 in the Control menu.
The RS232 communication window opens. (image 5-1)
Image 5-1
RS232 Communication window
Parameter values
Adjust the parameter values to suit the serial RS232 communication values between the local PC and
Digitizer.
Default values will already be filled in.
Communication port Change the Communication port to the serial p
ort as used for connecting
the PC to the Digitizer.
Baudrate
Read only value. Set up on 19200.
Databits
Read only value. Set to 8.
Parity Read only value. Parity is set to none. No p
arity check is used.
Stopbits Read only value. Stopbits is set to 1.
Status This setting is very important as it indicates as to whether the software
commands have effect on the system be
ingtalkedtobytheViewScape
Toolset software. When online all commands are sent and acted on, when
off-line all commands are not sent to the system devices.
R5976476 VIEWSCAPE TOOLSET 01/07/2004 43