Filter
Top Products
11. Input Slots for ViewScape
11.5.2 Image Processing
Saturation
Adjustable from 0 to 15 with the corresponding slider.
Saturation is the intensity of the color, 0 will be black & white.
Brightness
Adjustable from 0 to 63 with the corresponding slider.
Brightness is the intensity of the displayed signal.
Brightness will add or subtract ... to the luminance part of the signal.
Luma Tracking
Adjustable from 0 to 15 with the corresponding slider.
Luma Tracking adjusts the level of green haze appearing in the low lights.
Clip to Subblack
Adjustable from 0 to 15 with the corresponding slider.
Clip To Subblack will filter spurious LSB’s in low lights under black-level, to prevent that spuriou
spixels
appear in black planes, even after Dynamic Image Stabilization.
Internal Mode
Select between Median/Filmmode or Line Repetition.
The first is effective when the source signal has interlaced fields between frames.
The second is effective for a non-interlace field sources.
For normal video, Median/Filmmode should be selected.
Filmmode
Toggle between ON/OFF for either switching the Filmmode on or off.
Select ON to enable 2 to 2/3 to 2 pull down processing....
Select OFF to force the processing to normal ...
Film Detection Sensitivity
Select the level at which the filtered response for film content should be driven at. Useful for noisy video
content.
Film Detection Threshold
Select the level at which the film detection and processing is activated. Four levels exist. Useful for noisy
video content.
Freeze
Freezes the content of this source only.
Color Matrix
Select a Color Matrix suitable for the material being viewed:
AUTO Automatic adapted to incoming source, depending on measured raster frequency
EBU
European Standard (PAL/SECAM)
ANSI American Standard (NTSC)
R5976476 VIEWSCAPE TOOLSET 01/07/2004
107