Filter
Top Products
10. ViewScape Configuration
10.2.5.2 Soft Edge Settings
How to set up
1. Enable the blending status by checking the check box.
2. Do you want to use positioning lines?
If yes, Check the box enabled next to Positioning lines.
A pattern with the different areas will be displayed. (image 10-17)
If no, go to step 3
3. Set the values for Left, Right, Top and Bottom until the border of the overlap area is in the desired
position (value between 0 and 255). Set first the width for the first projector and repeat for the second
one. (image 10-18, image 10-19)
Image 10-17
R5976476 VIEWSCAPE TOOLSET 01/07/2004 95